Gradual loaded exercise of knee extension muscles using an orthosis after wide resection of a femoral sarcoma and quadriceps muscle: a case report.

BACKGROUND: Details of improved gait ability after wide resection of soft tissue sarcomas that necessitate removal of portions of the quadricep muscle have not yet been reported. We describe a patient with improved gait ability following a rehabilitation program after wide resection of a soft tissue sarcoma that included four components of the quadricep muscle. CASE PRESENTATION: An 85-year-old Japanese man underwent wide resection of an undifferentiated pleomorphic sarcoma that included portions of the quadriceps femoris muscle. The rectus femoris, vastus medialis, sartorius, and vastus intermedius were separated in the maximally bulging region of the tumour. Three weeks postoperatively, gait exercise was initiated using a rigid knee orthosis with a dual-adjustable lock knee. The contraction loading of the knee extension muscle was controlled by adjusting the hinge motion range of the orthosis as follows: fully extended, fixed knee 0°-30°, and free range. Under this regimen, he could walk independently without a rigid orthosis within 5 weeks postoperatively but could not sit on his heels during daily living activities. At six months, there was no clinical evidence of recurrent tumours or complications. CONCLUSIONS: Postoperative gait ability might be affected by not only the number of resected muscles but also by the function of the separated muscles and the cross-sectional area of the remaining muscle. Gradually loaded exercise of the knee extension muscles using an orthosis could result in an improved gait motion for patients who undergo wide resection of a sarcoma that includes four components of the quadriceps femoris.

Effect of the COVID-19 pandemic on the oral health and nutritional status of Japanese older adults who underwent total hip or knee arthroplasty: A 3-year single-institution retrospective cohort study.

The coronavirus disease 2019 (COVID-19) pandemic affected the physical and mental health, socioeconomic status, and community behavior of people worldwide. The aim of this retrospective cohort study was to analyze the impact of the COVID-19 pandemic on the oral health and nutritional status of Japanese older adults based on the results of preoperative assessment in patients who underwent total hip or knee arthroplasty under general anesthesia. This study included older adults (≧65 years) who underwent total hip or knee arthroplasty in whom orthopantomography was performed for preoperative oral health assessment, during January 2019 to December 2021. Gender, age, number of family members living together, number of teeth, body mass index, and serum total protein and serum albumin levels were collected for analysis of this study. A total of 201 patients aged 65 to 89 years participated in the study. While the COVID-19 pandemic has had no impact on the oral health status, there has been a drop in serum albumin level from the results of multivariable-adjusted regression analysis considering age, gender, number of family members, and time. The COVID-19 pandemic has affected the serum albumin level of Japanese orthopedic patients aged 65 years or older.

The Effect of Static Stretching Duration on Muscle Blood Volume and Oxygenation.

ABSTRACT: Matsuo, H, Kubota, M, Shimada, S, Kitade, I, Matsumura, M, Nonoyama, T, Koie, Y, Naruse, H, Takahashi, A, Oki, H, Kokubo, Y, and Matsumine, A. The effect of static stretching duration on muscle blood volume and oxygenation. J Strength Cond Res 36(2): 379-385, 2022-Muscle blood volume increases due to stretching; however, the minimum duration of stretching to sustainably increase the muscle blood volume after stretching has not yet been elucidated. This study examined whether the duration of static stretching influenced the muscle blood volume and oxygenation. Ten healthy male subjects participated in this controlled laboratory study. Static stretching of the gastrocnemius muscle was performed for 5 durations (20 seconds, and 1, 2, 5, and 10 minutes). Changes in both the total-Hb (ΔtHb), as an index of blood volume, and tissue oxygenation index (ΔTOI) from baseline were determined using near-infrared spectroscopy. Both the ΔtHb and ΔTOI decreased during stretching and increased after stretching. The minimum value of ΔtHb during stretching did not differ in each of the 5 durations, but minimum ΔTOI progressively decreased with longer durations of stretching. The peak value of ΔtHb after stretching increased with longer durations of stretching. The value of ΔtHb at 5 minutes after the end of stretching increased with more than 2 minutes of stretching compared with 20 seconds of stretching, although the value of ΔtHb did not significantly differ between the 2, 5, and 10 minutes' durations. These findings suggest that a longer duration of stretching elicits a decrease in muscle oxygenation during stretching, and an increase in both the muscle blood volume and oxygenation after stretching. The results indicated that the minimum duration of stretching to sustain an increase in the muscle blood volume after stretching is 2 minutes.

Intraarticular injection of processed lipoaspirate cells has anti-inflammatory and analgesic effects but does not improve degenerative changes in murine monoiodoacetate-induced osteoarthritis.

BACKGROUND: Previous basic research and clinical studies examined the effects of mesenchymal stem cells (MSCs) on regeneration and maintenance of articular cartilage. However, our pilot study suggested that MSCs are more effective at suppressing inflammation and pain rather than promoting cartilage regeneration in osteoarthritis. Adipose tissue is considered a useful source of MSCs; it can be harvested easily in larger quantities compared with the bone marrow. The present study was designed to evaluate the anti-inflammatory, analgesic, and regenerative effects of intra-articularly injected processed lipoaspirate (PLA) cells (containing adipose-derived MSCs) on degenerative cartilage in a rat osteoarthritis model. METHODS: PLA cells were isolated from subcutaneous adipose tissue of 12-week-old female Sprague-Dawley rats. Osteoarthritis was induced by injection of monoiodoacetate (MIA). Each rat received 1 × 106 MSCs into the joint at day 7 (early injection group) and day 14 (late injection group) post-MIA injection. At 7, 14, 21 days after MIA administration, pain was assessed by immunostaining and western blotting of dorsal root ganglion (DRG). Cartilage quality was assessed macroscopically and by safranin-O and H&E staining, and joint inflammation was assessed by western blotting of the synovium. RESULTS: The early injection group showed less cartilage degradation, whereas the late injection group showed cartilage damage similar to untreated OA group. The relative expression level of CGRP protein in DRG neurons was significantly lower in the two treatment groups, compared with the untreated group. CONCLUSIONS: Intra-articular injection of PLA cells prevented degenerative changes in the early injection group, but had little effect in promoting cartilage repair in the late injection group. Interestingly, intra-articular injection of PLA cells resulted in suppression of inflammation and pain in both OA groups. Further studies are needed to determine the long-term effects of intra-articular injection of PLA cells in osteoarthritis.

Simultaneous Presentation of Lymphomatoid Granulomatosis and Multiple myeloma in an Immunodeficient Patient with Rheumatoid Arthritis.

A 75-year-old Japanese woman with a 20-year history of rheumatoid arthritis presented with symptomatic bilateral pleural effusion and lung and brain tumors. She had received methotrexate for five years and tacrolimus for one year. A brain biopsy specimen showed the pathological features of lymphoproliferative disease, but a bone marrow biopsy showed proliferation of plasma cells. She was finally diagnosed with coexistent lymphomatoid granulomatosis (LYG) of the brain and lung and multiple myeloma (MM) of the bone marrow and received chemotherapy for both. This report shows that immunodeficient patients are at risk of developing the unusual coexistence of LYG and MM.

Functional outcome of patients with unstable pelvic ring fracture.

The purpose of this study was to evaluate factors that correlated with unsatisfactory short- and long-term outcome in patients who sustained unstable pelvic ring fracture. The study subjects of this study were those of type B and C pelvic ring fractures (82 patients; mean age 54 years). Age, gender, associated injuries, fracture type, Injury Severity Score rating and treatment methods were assessed, and Majeed score for functional outcome and radiographic studies at 1 year after injury (short-term) and at final follow-up (long-term), with mean follow-up of 98 months were analyzed. Significant univariate factors ( p < 0.05) were entered in a multivariate logistic regression model to determine the independent predictors of unsatisfactory functional outcome. Univariate analysis showed that fractures of the lower extremity, nerve damage, conservative treatment, and radiological outcome correlated with unsatisfactory short-term functional outcome, while female gender, brain injury, nerve damage, conservative treatment, fracture location at the posterior portion of pelvic ring, radiological outcome, and pure sacroiliac dislocation only for type C fracture correlated with unsatisfactory long-term outcome. Multiple logistic regression analysis identified fractures of the lower extremity (odds ratio (OR): 5.364), conservative treatment (OR: 13.690), and nerve damage (OR: 21.392) as determinants of unsatisfactory short-term functional outcome and nerve damage (OR: 66.926) and poor radiological results (OR: 33.944) as determinant of long-term functional outcome. In patients with unstable pelvic ring injury, fractures of the lower extremity, conservative therapy, and nerve damage influenced short-term functional outcome, while that nerve damage and the pelvic ring displacement over 20 mm negatively affected long-term outcome.

Reconstruction of acetabulum in revision total hip arthroplasty for pelvic discontinuity: report of a difficult case requiring four revision arthroplasty.

BACKGROUND: Massive bone defects of the acetabulum with pelvic discontinuity are one of the major problems in revision total hip arthroplasty. Several techniques have been described for repair of acetabular defect; however, reconstruction of acetabulum with massive bone defect is still a major problem. We describe a patient who required four revision total hip arthroplasty during a 24-year period. FINDINGS: The acetabulum with pelvic discontinuity was successfully reconstructed by stabilization of the posterior column with a plate commonly used for fracture treatment, and stabilization of the anterior column by reinforcement device commonly used for acetabular reconstruction. Fixation of both acetabular columns provided significant improvement of component stability. CONCLUSIONS: In the case of pelvic discontinuity with massive acetabular bone defect, reconstruction by stabilizing both acetabular columns using reconstruction plate and KT plate is one of the better surgical options.

Long-term clinical outcome of acetabular cup revision surgery: comparison of cemented cups, cementless cups, and cemented cups with reinforcement devices.

The aim of the present study was to analyze the clinical and radiographic outcomes and Kaplan-Meier survivorship of patients who underwent revision surgeries of the acetabular cup that had sustained aseptic loosening. We reviewed 101 consecutive patients (120 hips; 10 men 11 hips; 91 women 109 hips; age at surgery 66 years; range 45-85) who underwent acetabular component revision surgery, at a follow-up period of 15.6 years (range 10-32). To evaluate the state of the acetabulum, acetabular bony defects were classified according to the AAOS classification based on intraoperative findings: type I (segmental deficiencies n = 24 hips), type II (cavity deficiency n = 48), type III (combined deficiency n = 46), and type IV (pelvic discontinuity n = 2). The Harris hip score improved from 42.5 ± 10.8 (mean ± SD) before surgery to 74.9 ± 14.6 points at follow-up. The survival rates of the acetabular revision surgery with cemented, cementless, and cemented cups plus reinforcement devices were 74, 66, and 82 %, respectively. The difference in the survival rate between the cemented and cementless group was marginal (p = 0.048 Gehan-Breslow-Wilcoxon, p = 0.061 log-rank), probably due to the early-stage failure cases in the cementless group. The cementless and reinforcement groups included nine early-stage failure cases. To prevent early-stage failure, we recommend the cementless cups for types I and II acetabular bone defects with adequate contact between host bone and acetabular component, and the cemented cup with or without reinforcement devices, together with restoration of bone stock by impaction or structured bone grafting, for cases lacking such contact.

Modified metaphyseal-loading anterolaterally flared anatomic femoral stem: five- to nine-year prospective follow-up evaluation and results of three-dimensional finite element analysis.

We have designed a proximal-fitting, anterolaterally flared, arc-deposit hydroxyapatite-coated anatomical femoral stem (FMS-anatomic stem; KYOCERA Medical, Osaka, Japan) for cementless total hip arthroplasty (THA) for Japanese patients with dysplastic hip osteoarthritis, using a nonlinear three-dimensional finite element analysis simulating loading conditions. The Anatomic Fit stem was modified in the region of the arc-sprayed surface, to allow more proximal appearance of spot welds. The aim of the present study was to analyze the clinical and radiographic outcomes of patients who underwent THA using this stem. We reviewed 73 consecutive patients (79 hips; 13 men 16 hips; 60 women 63 hips; age at surgery, 57.6 years, range, 35-78) who underwent cementless THA using the Anatomic Fit stem, at a follow-up period of 7.1 years (range, 5.1-9.4). Harris Hip score improved from 40.7 ± 17.1 before surgery to 91.0 ± 5.2 points at follow-up. The 7.1-year stem survival rate was 100%. Radiographs at follow-up confirmed the stability of the femoral stems within the femoral canal in all cases, with sufficient bone ingrowth. None of the patients had subsidence of the stem exceeding 2.0 mm within the femoral canal or changes in varus or valgus position of more than 2.0°. The Anatomic Fit stem provided excellent results. The nonlinear three-dimensional finite element analysis demonstrated that the stem-bone relative motion was 10 µm at the proximal end of the stem and proximal load transfer. Our analysis confirmed reduced radiolucency around the stem, minimal subsidence, appropriate stress shielding, and promising medium-term stability within the femoral canal.

Metaphyseal-loading anterolaterally-flared femoral stem in cementless total hip arthroplasty: five- to eleven-year follow-up evaluation.

Using a nonlinear three-dimensional finite element analysis simulating loading conditions, we designed a new type of proximal-fitting, anterolaterally-flared, arc-deposit hydroxyapatite-coated anatomical femoral stem (FMS-anatomic stem; Japan Medical Materials, Osaka, Japan) for cementless total hip arthroplasty (THA) for Japanese patients with dysplastic hip osteoarthritis. The aim of the present study was to analyze the clinical and radiographic outcomes of the new stem. We reviewed 143 consecutive patients (164 hips; 13 men, 14 hips; 130 women, 150 hips; age at surgery, 56.6 +/- 7.6 years, mean +/- SD, range, 30-74) who underwent cementless THA using the FMS-anatomic stem at a single institution, with a follow-up period of 7.6 +/- 1.6 years (range, 5.3-11.0). Harris Hip score improved from 46.1 +/- 12.6 before surgery to 90.0 +/- 8.9 points post-THA. The 7.6-year survival rate of the stem was 99.0% after revision for aseptic loosening. Radiographs at follow-up confirmed the stability of the femoral stems within the femoral canal in all cases, with sufficient bone ingrowth. None of the patients had subsidence of the stem exceeding 2.0 mm within the femoral canal or changes in varus or valgus position of more than 2.0 degrees . The FMS-anatomic stem provided excellent results in patients with dysplastic hip osteoarthritis. Our analysis confirmed reduced radiolucency around the stem in Gruen zones, minimal subsidence, appropriate stress shielding, and promising medium-term stability within the femoral canal in our patients.

Rapidly progressive neuropathic arthropathy of the knee in possible association with a huge extruded cervical intervertebral disc herniation.

A 58-year-old woman with an insignificant stage of diabetes mellitus presented with rapidly progressive osteoarthritis of her right knee exhibiting painless but significant antero-posterior and lateral instability. In association, she had a huge extruded left-sided cervical intervertebral disc at the C4-5 level. Neurological examination of the upper limbs was normal but, she had diminished pinprick sensation on the right leg. Radiographic findings were consistent with neuropathic arthropathy of the knee. Anterior decompression with fusion of C4-5 and total knee arthroplasty using a semi-constrained-type artificial implant were performed in one stage. The patient regained nearly normal living activity following surgical intervention. We stress the possibility of rapid progression of knee joint arthropathy, as neuropathic knee, even in a patient with less significant symptoms and signs of cervical myelopathy caused by a huge extruded intervertebral disc.

Relation between vertical orientation and stability of acetabular component in the dysplastic hip simulated by nonlinear three-dimensional finite element method.

In acetabular dysplasia, more vertical orientation of the acetabular component is often used to minimize the superolateral bone grafting. This study was designed to determine the effects of vertical orientation of the cup on the stability and polyethylene wear of the acetabular component in uncemented total hip arthroplasty (THA). Three-dimensional finite element models of the hemipelvis with dysplastic acetabulum were developed. Metal-backed hemispherical cups were placed in the true acetabulum with abduction angles of 35, 45, 55, and 65 degrees. It was found that more vertical orientation of the cup was associated with larger relative motion of the metal shell between the acetabulum and metal shell. Furthermore, tilting and torsional shear stresses in the model of the cup abduction angle of 65 degrees were found to be 1.7 times larger than that in the model with 35 degrees at the bone-metal shell interface. More vertically oriented cups caused larger contact stresses at the articulating surfaces of the polyethylene liners. The results suggest that the abduction angle of the acetabular component significantly influences cup loosening and polyethylene wear in THA.